BROXTEC s.r.o.

The hinged steel belt chip conveyors are equipped with a hinged steel conveyor belt, on which the chips, other cuttings, small products, scraps, forgings or waste fall and are taken away, thanks to cross transmitters, to the prepared collection container (tipping waste skips).

We offer the following pitches of the belt elements:

• 1.5" (38.1 mm). Height of the load section of the conveyor from 118 mm!!
• 2.5" (63.5 mm). Lower or higher profile. Special belts for hard machining.
• 6" (152.4 mm). For heavy duty, roughening shops, press shops, recycling.

The metal hinge belt is, in case of 1.5" and 2.5" pitches, assembled (not welded) which allows its quick disassembly, eventual replacement of damaged elements and repeated assembly.

The most requested is a full metal hinge pimpled belt. The pimples prevent the chips from sticking to the belt. On the contrary, the full apron plates prevent from draining the fine chips through the belt. In combination with a spring scraper or air knife, this type of belt is also suitable for aluminum chips.
In applications requiring a larger flow of coolant, we use a perforated belt when the type of chips allows.
However, in many cases, a compromise is necessary, and we choose a combined belt.
The metal hinge belts are fitted with set of standard, serrated and wiping cleats.
Do you need advice whether a hinged steel belt conveyor is suitable for you?
Do not hesitate to contact us.

Choose the conveyor type based on the type of chip and transported material, or send us your demand directly.

• The tracks and the bottom reinforced with highly wear-resistant material.
• Thermal-treated belt and main axles.
• Welded eyes of the hinges.
• Cleats in the shape of a reversed "V"
• Simple chip catchers preventing pulling the chips under the belt.
• Spring chip scrapers preventing pulling the chips under the belt.
• Air knives preventing pulling the stuck (especially aluminum) chips under the belt.
• Electric equipment and control – switchboards on customer's request.
• Pumps, watermarks, level gauges, skimmers of oil from liquid surface, etc.
• Height and volume optimized containers for chips.
• Filtration device for filtering coolant emulsions and cutting oils.
• And 12 other advantages.

• Coolant tanks.
• Filtration units.
• Chip containers, waste skips.

You will get a complete system for chip removal and filtration of coolant emulsions or cutting oils.

The design of our belt conveyors allows changing the hinged steel belt conveyor to a scraper conveyor by a simple replacement of the conveyor belt for the drag flight chain and changing the direction of engine revolutions.